Wheel type banding tool MBT-003
Wheel type tool for operations with band strapping.
It is intended for tensioning the stainless steel strip for mounting the fittings on wooden, concrete or metal poles. The tool is equipped with special blade for easily cutting the strip.
Wheel type tool for operations with band strapping
|Product code||Band size, mm||Thickness of band, mm||Net weight||Material|
|MBT-003||< 20||< 1.5||1.800||Hot dip galvanized steel|
1. Cut strips of length equal to the circumference of the pole with a margin of 200 mm threading in a central opening of the ties to a depth of 20 mm and bend in the direction of the main portion of the tape
2. The free end of the tape threaded through the slots of the mount, to embrace them with support and threading in a central opening buckles.
You need to pull the tape as long as it is not tightly grip the support and pole fitting.
3. The free end of the tape to get to the tool through the cutting mechanism and secure locking.
Belt tension by turning the tension mechanism clockwise. After the tension necessary to bend the free end of the tape in the direction of the ears with clamps. In the bending process to avoid rupture of the tape should loosen it by turning the tensioning mechanism anti-clockwise 2 revolutions.
Cutting of the ribbon by turning the handle of the cutting mechanism.
4. Buckles ears should be fixed with a hammer,
securely locking the tape.