Eye fitting for insulator
Jera has researched a wide range of composite or polymer insulator fittings for Medium Voltage and High voltage overhead lines. For Overhead Transmission line and polymer insulators, one of the most critical decisions involves in selecting the proper string hardware to correspond to the requirements of tension load and duration of usage.
One of product that correspond to mentioned requirements is eye fitting EF-16, which is used at the ends of composite insulators during construction of line with AAAC, ACSR, ACSS cable systems with voltage 10-35kV
Insulator eye fitting is made of hot dip galvanized forged steel. Oval Eye End Eye fitting is made by forging that guarantee its high strength characteristics, to withhold the static or dynamic loads. Further eye or ring and clevis connection of polymer insulator and string hardware is realized by close-pin solution, which eliminates the risk of failure of electric power transmission line from wind movement, vibrations.
Jera line is able to produce fittings for silicone rubber insulator and pole line hardware according to customers’ drawings and special requirements.
Typical line hardware system is applied by using dead end strain clamp, socket eye, socket clevis, U-bolt, link single plate, link fitting, anchor shackles, which are available in Jera high voltage accessories product case. All the assembly of link fitting passed temperature cycling and aging tests, corrosion resistance test, tension test.
Jera’s product assortment of high-voltage fittings and power line accessories is constantly expanding. We are focus on the quality and on the completed solutions for our customers.
Welcome to contact us