Mechanical Cable Connectors for MV

When install the mechanical cable connectors, only needs to screw to fasten the cable conductor and shear-head bolts off, the bolts will break off at a preset torque to ensure a consistent, reliable connection. This easy and fast installation also reduce the human maintenance cost. Jere Line’s shear head bolts mechanical cable connector is made by tin covered aluminum material, it can be used for connecting both aluminum and copper conductors. Meanwhile the sizes are from 16-1000mm2, wide range of cable application sizes, covered typical conductor cross-sections. The applications are including: · Electrical Transmission and Distribution Lines · Substation Equipment · Grounding Systems Jera Line’s mechanical cable connectors as undergone rigorous tests under international standard IEC 61238-1-3:2018 by the third party independent laboratory, which showed the products reliable quality. The testing scopes are including: 1.Electrical performance test, to test temperature and shory-circuit, to ensure that the temperature of the lug during operation doesn’t exceed safe limits and evaluates the lug's ability to withstand short-circuit conditions without degradation. 2.Mechanical perfomance test, to measure the lug's ability to hold the conductor securely under mechanical stress and ensure the bolts break at the correct torque. 3.Enviromental and aging tests, to check the lug corrosion and temperature level. 4.Electrical resistance test, to ensure the contact between cable and lugs. Jera Line is an ISO 9001-certified direct manufacturer location in China, specializing in the production of low voltage cable connectors. For any inquiries or further information, feel free to reach out to us!