Suspension Clamp SSA-1
Suspension clamp SSA-1, is intended to be used with optical figure 8-fiber cable with metal messenger or FRP messenger during construction of network line. The clamp consists of plastic inserts, which fix the optical cable without damaging. The insert is double sided which helps to suspension a wider range of messenger diameters. This fiber optic clamp used on straight routes of optical fiber cable line.
Compared to suspension clamp SSA, optical suspension clamp SSA-01 has holes, in order to proceed an installation to round pole by stainless steel band, directly, which simplify the installation process. However, an alternative of installation by drive hooks, pole brackets and other fiber optic line fittings exists.
Suspension clamp SSA-1 fiber suspension clamp, is made of UV resistant polymer and hot dip galvanized metal plates with s/s hardware. Fiber optic drop cable clamps design allows withstand a sufficient load without cable slip and damage. The optical cable does not slips from the clamp if needed mechanical strength was reached. This achieved by reinforced metal plates and reinforced plastic materials.
over insulation, mm
4 – 5 / 5 – 9
Optical cable suspension clamp SSA, figure 8 tension clamp, is supplied either separately or together as assembly with other needed fiber cable fittings that are in Jera product range. Such as stainless steel strap, buckles, and pigtail hook, bolt or brackets and figure 8 tension clamp with anchor hooks. Other optical fiber clamps are easily to be pick up according to mechanical resistance and diameter of cables’ wire of messenger. Fiber cable fittings of Jera can be installed on dead-end, double dead-ending network cable routes.
All the assemblies of fiber cable clamps passed the tensile tests, operation experience with temperatures ranging from – 30 °C up to +50 °C test, temperature cycling test, aging test, corrosion resistance test etc.
Analogs: SSA, CS, SC 37 We can customize this product according to required cable size. Welcome to contact us!